Deaign Features
-High energy efficiency
-One-piece,compact construction
-No whirl vanes or internal parts
-1/8''or1/4''male connection
-100-mesh screen,20 micron paper filter or 70 micron polypropylene filter optional
-Optional welded pin and optional safety wire hole
Impacting the atomizing nozzle, in this direct pressure nozzle, the fine liquid column ejected from the nozzle hole hits the target needle with the same diameter and the nozzle diameter facing it, and then forms a very fine atomization, in some applications, This nozzle even replaces many expensive two-fluid air atomizing nozzles that use compressed air or water vapor as the second fluid.
The company has introduced advanced punching equipment from the United States. The hole diameter is 0.1MM-0.15MM. Under the pressure of 70KG-120KG, the nozzle forms a very fine atomization, which can be widely used in textile workshops, man-made operations, livestock farms, and greenhouses. For other occasions where humidification spray is needed in the greenhouse, the power consumption per kilogram of fog is 3W, and the original is very low.
|
Product name
|
JM Impingement Mist Nozzle
|
|
Material
|
Brass, 303 Stainless Steel, and 316 Stainless Steel
|
|
Thread size
|
1/8", 1/4",
|
|
Spray pattern
|
Cone-shaped Fog
|
|
Pressure
|
2 bar to 70 bar
|
|
Capacity
|
0.043L/min to 5.34L/min
|
|
Spray angle
|
90°
|
|
Drop size
|
About 50 MICRO
|
|
Application
|
Cooling, Humidifying
|
|
Net weigh
|
7g
|
Performance data:
Contact Us
